FIA Anti-Launch: the year of truth

The FIA-mandated system officially comes into force, with the stated aim of mitigating wheel-to-wheel contact effects and improving karting safety. After double-testing in races between Cremona and Malaysia at the end of 2025, this year it gets serious across all classes. (fm)
FIA Anti-Launch: the year of truth
Advertisement
It's hard to have heard positive things about it. Even harder if you've seen them up close. If watching karts on track with the 2026 regulation-mandated parts didn't convince you, here we are. Few insiders, let alone drivers, have officially expressed enthusiasm for this novelty since it was fitted to karts in an official competition at Cremona—this premise seems necessary.

In recent days, however, the FIA convened a roundtable inviting journalists from major karting specialized publications, including Vroom, to analyze in detail the long R&D work leading to this solution's introduction, the on- and off-track tests, and the technical upgrades implemented after the Cremona debut and officially raced in the FIA "Arrive and Drive" event held in Malaysia in November 2025.

Project Genesis
The project timeline, funded by the FIA Foundation, spans from late 2024 and culminates in use across two official competitions: the Academy Trophy at Cremona in September 2025 and the Arrive and Drive World Cup in Malaysia on the November 16 weekend. As highlighted by Nuno Costa (FIA Safety Director) and Marco Petrilli (Deputy Safety Director & Head of Research and Vehicle Safety FIA), "an initial phase of preliminary tests was conducted using 3D-printed models by the Mercedes-AMG PETRONAS F1 TEAM, which actively participated from the outset, followed by a longer second phase of on-track testing." This proves various options were tested, modified, and refined until adopting the system seen on track.

Based on the summary from Costa and Petrilli and the project timeline, we can therefore consider- as the technicians themselves affirmed in response to a colleague's question during the meeting - that "adopting the anti-launch system already in 2026 is not premature." In addition to the 3D prototyping work, there was collaboration during that period with kart bodywork manufacturers and on-track technicians, not overlooking drivers' feedback on karts with the various systems and prototypes leading to the 2026 version. For instance, the very first test phase revealed that fully covering tires could cause side effects in terms of heating and tire performance, so focus shifted to solutions and designs not fully enclosing the wheel. In the final phase, with the current anti-launch configuration, on-track tests with pro drivers showed the kart slightly stiffer on dry tracks, likely due to tighter bumper fastening - a routine issue manageable by technicians and drivers via general setup adjustments.

Not an anti-rollover
Another key point from the roundtable: the system's primary goal isn't strictly "preventing rollovers" as one might think, but “mitigating the chances of wheels lifting off the ground on contact”. Since losing ground contact with even one wheel turns the driver into a mere passenger - whether rollover occurs or not - this system on all karts should, based on tests and predictions, limit by a "good percentage" cases of karts launching after wheel-to-wheel contact, whether rear-end (shunt) or lateral. The issue is that when a rear wheel lifts so far, the risk of some incident is very high. The protection targets the rear and side rear wheel - source of many of karting's most dangerous accidents, whether the kart flips, or anomalous asphalt loss projects the driver out of the seat or worse.
 

In bench tests of the anti-launch system, belt-driven rollers capable of simulating speeds up to 120 km/h were used, with a rigidly fixed chassis for longitudinal impacts


This perspective is the only one where adding plastic material (crudely put) can currently be digested by those implementing it (teams, manufacturers, drivers), giving this solution the benefit of the doubt as deserved, especially since it involves predictions, not field-measured percentages, and a "360-degree" view - as literally stated by FIA reps at the meeting - of potential on-track contact scenarios. Initial feedback from some race contacts in the final Malaysia event is optimistic: several incidents that would have risked major rollovers in standard config saw karts behave differently, limiting outcomes to generic track excursions without lifting off.

System behavior and post-Cremona updates
Practically, the roller inside the wheel arch ensures that on rear-end collision, the hit kart "rebounds" energy via the roller, avoiding axle lock on the leading kart and dissipating over 60% more energy (per bench tests simulating the front kart's motion via electric motor) than today's rear bumper system.
 

The drivers involved in the tests reported that there are no significant differences during driving compared to the currently used configuration


Current bumpers indeed decelerate the leading kart on shunt, which is harmful given the energies involved, turning it into a ‘temporary obstacle’ trampoline effect often flipping the rear kart. The system doesn't prevent rollovers 100%, as noted, but strongly mitigates probabilities by creating a "rebound" effect like in rental karts, rather than a "launch ramp" - albeit via substantially different devices.

Post-Cremona race test, technicians incorporated feedback into minor improvements: working on component elastomer (with bodywork makers) and fastening (with test teams and early race techs).
 

The FIA Karting Arrive and Drive World Cup in Malaysia served as an important testing ground to evaluate the modifications made after the system's first use at the Cremona Academy Trophy event

 
When we directly asked FIA reps if this marks a transition toward rental- kart or fully- bodied "minicar" aesthetics, their reassuring response was: "No, there's no intent to overhaul karting's look or core nature. Safety R&D was done and will continue respecting this sport's DNA".

Legitimate concerns and expectations
Our post-meeting impression is open-minded, not just critical, as indiscriminate attacks at this early stage smack of sterile social media polemic—best left to that realm by outlets like ours. Yet we can't ignore spontaneous doubts on karting's essence: accessible, adrenaline-fueled, somewhat dangerous like any adult motor sport where participants choose risks. Conversely, karting is the entry to a racing ladder with surging young participants needing utmost safety protocols. Still, a core "training" contradiction persists (even pre-anti-launch, honestly): future cars have exposed wheels, and legitimately questioning effects of recent kart protection changes on racecraft remains. Sure, cars have Halos, carbon survival cells unlike exposed, ultra-fast karts - but ideally, drivers avoid incidents primarily via conduct, aware reckless actions have consequences. Reducing incidents is fine, provided it doesn't erase "action-consequence" concepts; that's broader than anti-launch. Hopes are that fewer incidents won't spur overly reckless driving, as aggressive moves might now have milder outcomes.

In sum: boosting safety won't turn karting into "demolition derby" as some fear; perhaps, given years of all-level racing we've seen, it could gradually clean up race maneuvers in tight spaces (especially short tracks), demanding pinpoint precision, millimetric moves—and thus less post-race stewarding/promoter work, favoring talented over reckless (or dirty) drivers. Think how fron bumper penalties reshaped racing over the last decade.

Thus, 2026 is when talk stops. See you here end of year.
Advertisement

NEXT RACES

Advertisement

Newsletter

Stay tuned!
Sign up for our mailing list
Advertisement